j-3200-in-plusModel # J-3200.in Plus – Panel Saw (Manual) 

 

the product from 8×4 ft or 9×6 ft sheet. Panel saws are suitable to cut chip free all kind of laminated chipboard and MDF, HDF & panels. Panel saw of maximum strength & rigidity with value added features.
Heavy Duty Precision sliding table with linear bearing developed with advanced technology with multi-chamber system for maximum rigidity of the double roller carriage.

 

*5 Years warranty on sliding table

 

Salient Features:
• Sturdily built heavy duty m/c that suit Indian working condition for precise cut with burr free cutting  • Lifting and tilting of saw unit by hand wheels both on front side for more convenience     • Scoring Saw precision lever mechanism for manual adjustment controls of the scoring saw with memory reference stop  • Electronic digital readout of saw unit tilt          • Anodized aluminum rip fence with sliding system on heavy round bar for parallel cutting up to 1250mm. Fine setting mechanism allows for precise measurements for parallel cuts.   • Easy & fast, saw-scoring blades changing. Also entire saw unit on heavy duty cast-iron trunnion.  • Saw unit vertical movement on precise round guides ensures smooth operation. Its closed structure guarantees high rigidity & a vibration free unit.  • Scoring pin with memory reference stop for rapid re-position of the saw to a previous setting.  • Extra second support for large sheet.  • Rip fence with fine setting for precise positioning  • Made in India with best service support & very economical spares.

 


 

j-3000-inModel #  J-3000.in – Semi-Auto Curvilinear Edge Bander

 

This is an extremely flexible machine for application of PVC/ABS or Veneer on straight or shaped panels. The thickness of banding material can be from 0.5mm to 3mm and the machine is designed to accommodate a panel of 10-60 mm in thickness. The Edge Banding is a semi-automatic machine, wherein the pre-defined length of PVC/ABS to be glued to the laminate can be set for repetitive workpiece and the digital temp. controller and the speed regulator maintains the gluing temperature and feed rate of tap respectively to have an effective banding of PVC/ABS to the workpiece. The machine has a specially designed hylum surface working table for heat insulation and side roller support at both ends, which helps in easy movement and feeding of workpiece on the table. The machine guarantees perfect gluing at all times and is versatile and suitable to be used by small and large manufacturers.

 

Salient Features:
• Pneumatic cutter on the work table: the pneumatic cutting device can be set to actuate the pneumatic cutter to cut the band for a pre-defined length using an electronic counter.
• Efficient bonding system: The glue in the glue pot, glue leveler, wiper, the extrusion screw and the heating element all make a bonding system.   • Work piece moving on a tiltable aided by Swivel bar: A specially designed hylum surface working table can be tilted from 0 to 45° and has a unique “Swivel Bar Roller system” for guiding and supporting the work piece.
• Electronic digital millimeter counter to adjust the length./Electronic digital temperature controller with safety circuit, which allows starting the drive motor only when the hot glue has reached the set temperature./Revolving edge coil holder plate 525 mm Ø   • Double glue rollers in gluing device./Easy regulation of variable speed.

 


 

j-5500prc-open-door-jpgModel # J-5500PRc.in- (Auto) Edge Bander – New

 

Salient Features:
• Sturdy built heavy-duty machine to suit Indian working condition for precise application of edge banding material. • Edging wooden strip up to 12mm • Robust feed chain & conveyor system with German gearbox (with long life synthetics lubricant) for effective pressure on panels. • Pre-heating at infeed fence, to remove moisture from panel. • Pre-milling unit smooth the panel for achieving perfect joint line of the edge.
• High performance machine with feeding speed 14 m/min gives more production • Innovative pre-melting sensor operated glue tank having glue drop system which consumes less than 50% glue, compare to other Edge banders, which results to increase in profits. • No setting required to change thin to thick PVC edge band • Very easy to change over from PVC to wooden. • Three edge banding pressure rollers actuated by pneumatic cylinders & gas spring, gives adequate pressure on edge for effective banding. • High frequency compact motors sliding on prismatic guide ways for perfect finishing with trouble free performance. • Grooving unit to make groove on lower panel surface. • Easy accessible, user friendly Smart Touch PLC control panel positioned at machine infeed, for quick operations. • All electronic & pneumatic parts are from well known international brands. • Very easy to operate & nominal setting required during operation. • Low maintenance m/c, easy available cost effective spares, best service support.

 


 

 

j-4500-inModel # J-4500.in  – (Auto) Edge Bander – New

 

Salient Features:
• Sturdy built heavy-duty machine for entry level mass production work.  • Robust feed chain & conveyor system with German gearbox (with long life synthetics lubricant) for effective pressure on panels.  • High performance machine with feeding speed 14 m/min gives more production.  • No setting required to change thin to thick PVC edge band.  • High frequency compact motors sliding on prismatic guide ways for perfect finishing with trouble free performance.  • Easy accessible user friendly control panel positioned at machine in feed for  quick operations.  • All electronic & pneumatic parts are from well known international brands.  • Very easy to operate & nominal setting required during operation.  • Low maintenance m/c,easy available cost effective spares, best service support.

 

Gluing, Banding & Edge Cutting: Innovative pre-melting sensor operated glue tank having  glue drop system to automatically maintain require glue level in tank, so glue spreading roller provides precise & consistent glue application without glue overheating to avoid wastage of glue, which result into less than 50% consumption of glue, compare to other Edge banders. Perfect adhesion to the applied edge with 2 pressure rollers actuated by pneumatic cylinders & gas spring.  Heavy duty knife with pneumatic pressure cuts the edge  banding materials up to 50mm height & 3mm thickness.

 

End Cutting & Edge Fine Trimming: Compact and powerful high frequency two independent motors guarantees best finish on edge, sliding on two prismatic guide ways with recirculation ball  bearings.  Trimmer 2R cutter for PVC/ABS gives perfect rounding on edge of straight panel.

 


 

j-4700-inModel # J-4700.in – (Auto) Edge Bander – Up Graded

 

Pre -Milling (For J-4700P.in): An optimal unit for panel edge pre-milling with two high frequency compact motors.  Individual pneumatic cylinder for perfect prepares the panel for gluing.  Smoothes the panel for achieving perfect joint line of the edge.

 

The Feed Track: Robust feed chain & conveyor system with German gearbox gives straight movement & effective pressure on small / big panels.

 

Edge Scraping & Anti Adhesion Liquid:
Gives the best finishing touch to the PVC/ABS edges, leaving no trimming marks on the panel.   Unit complete with rotating copiers.   In order to prevent glue to adhere on panel, this liquid is sprayed to lower & upper edge surface of the panel.   • Sturdy built heavy-duty machine to suit Indian working condition for precise application of edge banding material.    • Innovative pre-melting sensor operated glue tank having glue drop system which consumes less than 50% glue, compare to other Edge banders, which results to increase in profits.  • Three edge banding pressure rollers actuated by pneumatic cylinders gives adequate pressure on edge for effective banding.  • All electronic & pneumatic parts are from well known international brands Schneider & Janatics  • Easy accessible, user friendly control panel positioned at machine infeed for quick operations.

 


 

j-5100prc-inModel # J-5100PRc.in -(Auto) Edge Bander – Up Graded

 

Pre – Milling:
An optimal unit for panel edge pre-milling with two high frequency compact motors. Individual pneumatic cylinder for perfect prepares the panel for gluing. Smoothes the panel for achieving perfect joint line of the edge.

 

Gluing, Banding & Edge Cutting:
Innovative pre-melting sensor operated glue tank having  glue drop system to automatically maintain require glue level in tank, so glue spreading roller provides precise & consistent glue application without glue overheating to avoid wastage of glue, which result into less than 50% consumption of glue, compare to other Edge banders.

 

Perfect adhesion to the applied edge with 3 pressure rollers actuated by pneumatic cylinders & gas spring.

 

Heavy duty knife with pneumatic pressure cuts the edge banding materials up to 50mm height & 3mm thickness.

 

End Cutting, Fine Trimming & Round Cornering:
Compact and powerful high frequency two motors guarantees best finish on edge, sliding on two prismatic guide ways with recirculation ball bearings. Trimmer 2R cutter for PVC/ABS gives perfect rounding on edge of straight, chamfered and regular post formed panel.

 

Buffing: Independently adjustable buffing wheels, for cleaning & polishing of the panel edges

 

 
Control Panel: Easy accessible user friendly Smart Touch PLC control panel positioned at machine in-feed, for easy & quick operations.

 


 

j-2103-in-triple-head-multi-boringModel # J-2103.in- (Semi-Auto) Triple Head Multi Boring Machine 

 

This machine is useful for vertical and horizontal drilling to the surface or edge of the work piece. Mainly suitable for making knock down furniture. “Offering multiple application, flexibility and high-productivity”

 

• The two vertical heads can slide away from each other depending on the center distance required between them. They can also be rotated by 90° giving more locational positioning. • The aluminum fence has 4 reference stops that slide on support rollers for smooth positioning. This makes it easy to feed long work piece. • Boring depth adjustment can be easy & quick setting of horizontal boring head. • Auxiliary support frame gives better solution for long panels.
Note: Models are available in single head & double head also

 


 

 

j-1250Model # J-1250.in – Vacuum Membrane Press

 

Vacuum abnormity wrapping technology
Most suitable for flush door and shutter manufacturers used for applying a uniform lamination of PVC, decorative papers and veneer till 0.4mm on top surface and borders on flat & designed work piece having smooth shape. It gives highest quality performance and finish with high production output. High performing single & double trolley models also available i.e. J-1252.in, J-1100.in & J-1102.in.

 

Salient Features:
• Used for applying a uniform lamination of PVC films, Decorative Papers and Veneer till 0.4mm. • Lamination on one sided Prelam MDF / Particle board. • One set of tray minimize with machine for optimal usage of work tray. • Silicon membrane offered for veneer application on flat surface only. • Heavy duty 3 hp German Vacuum Pump. • Centralized control panel for controls & display with digital temperature controllers & adjustable timers for fully automatic cycle.

 


 

 

j-4300r-inModel # J-4300R.in – (Auto) Edge Bander (Radius Trim New)

 

Salient Features:
•  Technological easy edge banding solution for entry level work./Work piece in feed by special belt for smooth feeding. Belt made of special material, which guarantees long-lasting sturdiness & stability. A synchronous tooth of belt & pinion gives high traction & vibration free movement with optimal panel holding./Automatic edge loading system for rolled edges with pneumatic shear for the coil cut./Pneumatically operated End cutting unit has solid cutter to guarantee a clean, precision cut on the front and rear edges of the panel./Compact and powerful high frequency motors guarantees best finish on top and bottom edges.Unit has copiers which are bearing mounted to ensure smooth panel feed. Very easy precision adjustment of trimming cutters by position indicators/Easy accessible control panel positioned at machine infeed, for easy & quick operations./Front telescopic support with roller conveyor for bigger work piece.  •  Easy adjustment of trimming & buffing unit./Radius Trim,For Chamfering of the Panel Corner,manually/Low maintenance m/c, easy available cost effective spares, best service support.

 


 

 

j-4230-four-side-moulder-main-photo-img_2672Model # J-4230- Four Side Moulder 

 

Salient Features:
• Sturdy built heavy-duty machine to suit Indian working condition for precise application of four side operation in one pass • Used for mass production of door frames, window frames, wooden floors etc. • Separate motors for each spindle to ensure efficient power transmission • All spindles are adjustable & their key devices are positioned on front of the machine for convenience. • Powerful drives for the cutter blocks delivers high torque for heavy duty cutting requirements • Top feed rollers for easy feeding of work piece with vibration in thickness  • Bed lubrication to reduce friction & improve feeding of timbers • Sealed safety enclose to reduce noise levels, improve extraction and operator safety. • Easy accessible user friendly control panel positioned near the machine in-feed for convenient & quick operation.

 


 

j-1824-drum-sander-main-photo-img_2689Model # J-1824 – Drum Sander

 

Note : Use Dust Collector with Sander machine for superior performance
• Two sanding drums for coarse and fine sanding in one pass
• User Friendly Control Panel with variable feed speed

 

 

 

 

 


 

 

1510-aModel # J-1510 (A) – Rebato’Mould – Auto (Prima Series)

 

Special design machine for Rebating & Moulding in single operation for door frame. Machine with in-feed & out-feed side supports.
• Auto feeding for mass production with better accuracy & safety  •  Increase of Profit by reuse of wood

 


 

 

j-1504Model # J-1504 (ST) – HDHQ Spindle Moulder with Sliding Table (Prima Series)

 

Heavy Duty High Quality specially design machine for mass production of solid wood doors & windows frame. Up to 10hp 3 ph capacity motor can be fitted (optional) for heavy work

 

 

 

 


 

 

j-1325Model # J-1325VT – CNC Router

 

“A higher quality CNC model, that allows you greater workability with ergonomically designed control panel”

 

For engraving & designing of flush doors & kitchen shutters. Make your industry high-tech at an affordable cost; thanks to heavy ball screw drive with high accuracy. Cast steel structure makes our routers more stable and auto lubrication makes maintenance much easier.

 

Tool holding guide system: A precision system to carry the CNC design commands. This Auto-Sliding guide system allows great design of flexibility. • Control System: A convenient, separate control panel box allows flexibility and efficiency in machine operating. Digital Signal Processing is applied here as the controlling system.

Precision vacuum working table:  For fixing and sure clamping of the workpiece, to ensure steadiness during the entire routing operations

 

Also available:
• CNC routers with higher capacity spindle
• J-1535 & J-2030 models